KAD/BCU/140 Ethernet backplane controller
- REQUEST A QUOTE
- TEC-NOT-049 - Power estimation
- TEC-NOT-058 - Overview of SNMP and using third party SNMP tools
- TEC-NOT-067 - INEA and iNET-X packet payload formats
- TEC-NOT-016 - Power dissipation, an example
- Manual: DAS Studio 3 User Manual
- Environmental Qualifications Handbook For KAM-500
- KAM-500 Databook
- Aerospace Instrumentation Brochure
- Bi-directional, full-duplex Ethernet connection with auto-sensing
- Mirrored Ethernet output supporting redundant IENA and iNET-X transmission
- IENA and iNET-X compatible packetization structures
- Supports aperiodic transmission
- Synchronization with a network time source using PTPv1 or PTPv2 or acts as PTPv1 Grandmaster
- Programming and verification of Acra KAM-500 chassis using TFTP
- Ethernet based data acquisition systems
Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...
The KAD/ADC/135 is used to condition and digitize up to 12 differential ended analog channels using simultaneous sampling 16-bit A/D for each channel. At the heart of the KAD/ADC/135 is a...
The KAD/ADC/136 is used to condition and digitize up to eight analog channels. Each channel can be configured for use in differential-ended or single-ended voltage measurement, ICP sensor, RTD...
The KAD/BCU/101 functions as two modules in one; an encoder and a backplane controller. The encoder is functionally identical to the KAD/ENC/005 and encodes data from any Acra KAM-500 module in an...
The KAD/BCU/105/AB1/ET is a full-duplex 100BASE-TX Ethernet Acra KAM-500 backplane controller, programmer and packet generator. In acquisition mode some or all acquired data is transferred from...
The KAD/DSI/102 monitors the status (high/low) of up to 24 differential-ended discrete input channels. Each of these has an assigned programmable 32-bit counter. Additionally each of the inputs can...
The KAD/MAT/101 allows you run your own programs based on a dual core C6000DSP+ARM9 microcontroller. It provides high performance DSP functions in a widely used architecture. You can develop...
The KAD/VID/106 is an H.264 video encoder card that converts one of three composite analog video inputs, or one Y/C analog video input to digital video and compresses it. Compressed video bit-rate...
The KAM/CHS/03F is a compact three user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/008 power supply unit. The backplane has three slots for...
The KAM/CHS/04L is a compact four user-slot Acra KAM-500 chassis, which along with the housing and backplane, includes a KAM/PSU/006 power supply unit. The backplane has four slots for...
The NET/REC/001 is a stand-alone Ethernet network recorder. Incoming Ethernet frames are written to a CompactFlash card using a FAT32 file system. The NET/REC/001 can be configured via...
The NET/SWI/101 is an 8-port airborne Ethernet switch designed for operating in harsh environments. Each port is configurable for 10BaseT, 100BaseTX, and 1000BaseT link speeds or auto-negotiate...
New Wireless Data Acquisition Evaluation Kit - Introductory Offer Contact us for details. The Wireless Data Acquisition evaluation kit is an all-in-one solution to get started with wireless...
IENA/iNET-X compatible, PTPv1 client or Grandmaster, PTPv2 client, dual Ethernet output
The KAD/BCU/140 is a full-duplex, Ethernet, Acra KAM-500 backplane controller packet programmer and an IPv4 data packets transmitter (via a 100BaseTX link interface).
The Acra KAM-500 backplane controller supports chassis programming via Ethernet using Trivial File Transfer Protocol (TFTP). Synchronization with an external PTPv1 Grandmaster is achieved using IEEE Std.1588-2004 (PTPv1) or IEEE Std. 1588-2008 (PTPv2).
Upon receipt of a programming packet, the module immediately exits acquisition mode and switches to program/verify mode.
In acquisition mode, some or all acquired data is transferred from the backplane to the onboard CVT. Onboard, it is packetized into either an IENA or an iNET-X application layer packet. Assembled packets are transmitted simultaneously on both Ethernet outputs. For asynchronous bus data, the KAD/BCU/140 supports aperiodic transmission for efficient bandwidth use, whereby a packet is not generated if no fresh data has been acquired from a packetizer user-module.
Contact our sales team today to learn more about our products and services.
Our support team can help answer your questions - contact us today.